2000W FM Transmitter for Radio Station

2000W Fm Transmitter For Radio Station

FM 100W to 2000W are fully digital transmitters for analog FM, designed for FM broadcasting within the low and medium power range.

Engineered to meet the needs of the most demanding network operators and stations, 2000W FM Transmitter combine reliable performance, high efficiency of up to 76%, and advanced technology into a compact, yet modular 2U or 3U chassis design. 

With their industry-leading design, they host a multitude of onboard features including SmartFM, a patented technology for up to 40% energy savings, making them unbeatable in terms of energy efficiency. Also fully featured for local maintenance and configuration, the Ecreso FM 100W-2000W allow extensive remote control by Web server, SNMP, RS232 or GPIOs.

FM broadcasters - experience the highest quality audio, always-on broadcasting, and the lowest total cost of ownership. 

Features:
 · Hearing similar to CD
 · All-digital technologies DSP+DDS
 · Built-in audio signal limiter
 · Analog and Digital (AES/EBU) audio signal input directly.
 · AGC circuit can keep the Output Power stability.
 · Big LCD display all the parameters in real time.
 · Communication Interface by RS232 for remote
 · Five kinds of protections for the security
 · Compact structure

Warranty：The warranty of all transmitters in our factory is 6 years.

Equipments included:

1.One 1000W FM Transmitte
2.One Dipole Antenna
3.One 30M Coaxial Cable
4.One 6-way Mixer
5.One Monitor Headphone
6.One Monitor Speaker
7.One Audio Processor
8.One Microphone
9.One Microphone Stand
10.One BOP cover

It can cover  20 to 25KM radius in ideal environment.

Quick Details

1. Frequency Range: 87.0MHz~108 MHz
2. Output Power: 0~2000W
3. Output power deviation: <± 10%
4. Output power stability: <± 3%
5. Output Load Impedance: 50Ω 20. LR channel level difference:<0.1dB (100% modulation)
6. RF Output Interface: 7/16"(female) or 7/8"Flange
7. SFDR: < -70dBM
8. High Harmonic: < -65dBM
9. Residual Amplitude Modulation: < -50dB
10.Carrier Frequency Precision: ±200Hz
11. Analog Audio Input: -12dBm~+8dBm
12. Audio Input Level Gain: -15dB~+15dB, step 0.1dB
13. Audio Input Impedance: 600Ω, Balance, XLR
14. AES / EBU input impedance: 110Ω, Balance, XLR
15. AES / EBU input level: 0.2 ~ 10Vpp
16. AES / EBU sample rate: 30kHz ~ 96kHz
17.SCA Input: Unbalance (optional) BNC connector
18.Pre-emphasis: 0μS, 50μS, 75μS (optional)
19.Audio Response: ±0.1dB (30Hz~15000Hz)
20.Stereo Separation: ≥50dB 30Hz ~ 15000Hz
21.Stereo S/N ratio: ≥70dB 1KHz, 100% modulation
22.Distortion: < 0.1% 30Hz~15000Hz
23.Cooling mode: Forced Convection
24.Temperature Range: -10°C~+45°C
25.Relative humidity: <95%
26.Working Altitude: <4500m
27.Power Consumption: 3300VA
28.Size: 460mm*480mm*88mm
29.Weight: 25KG

FREQUENTLY APPLICABLE USES:

1). Community Radio stations
2). LPFM radio stations
3). City radio stations
4). Christian Church radio stations

OUTSTANDING FEATURES:
1) OVERHEAT PROTECTION: The transmitter will switch to auto-protection with alarm message and a beep sound once the working temperature gets higher than normal range. 
2) OVER SWR PROTECTION: SWR is the indication of antenna system connection with transmitter. Once the connection is bad and causing a high SWR Value, the transmitter will switch to automatic protection mode by showing alarm message on the screen with a beeping sound meanwhile. 
3) FAN ERROR ALARM When the fan stops running, the alarm message will be displayed on the screen. 
4) ADJUSTABLE POWER OUTPUT The RF out of this 500W FM Transmitter is continuously adjustable from 0-500 watt at the stepping of 0.1watt, which means you can tune it to 1w, 1.1w, 1.2w...50w...100w...500w, with just one transmitter you’ll get multiple modes of outputs and easy to tune as per your needs

Certifications

Exhibition

Packing & Delivery